I took this photo with my GoPro Hero 4 Black attached to my 3DR Solo @ Nani Falcone Park in San Antonio, Texas. We just had a big storm on February 20th, 2017 and I was curious as to what this creek looked like after all that rain and wind! The 3DR Solo has a GPS upgrade by a company named mRo and they sell a few aftermarket parts for the 3DR Solo. There are a lot of other Quadcopters out there hovering around but the 3DR Solo is one of the cheapest with the most range of features that you’ll find on a Hobbyist Drone. Unlike many other Multi rotors on the market this one can be modded quite a bit. You can find all kinds of sensors and cameras to make Land Surveying a breeze.

I like that the 3DR Solo offers a range of what they call “Smart Shots” which allow you to do things like take a Drone Selfie or Orbit your selected target and it does this all automatically. Of course you just have to press one button to return your 3DR Solo back to its default flying mode. Each flight can last up to 20 min which of course is affected by the external conditions such as wind, rain, temperature and how the pilot (YOU) fly your aircraft.

Come fly with us in San Antonio, Texas

Call Us (210) 549-6046 Or contact us For more details Here

If you’d like to start flying today you can Contact Us now and we can get you started today! We offer the following:

• Flying classes – Basics
• How to Build Your Own Classes – Basics
• How to Fly FPV – Basics

The post Nani Falcone Park Flyover San Antonio, Texas appeared first on Errin Lyons.

I just picked up my 3DR Solo this last week and have been flying it whenever I get the time. I also wanted to register with the FAA since it only costs $5 to do so. I am now licensed to fly legally, and will soon be getting my Part 107. You can contact us with questions here.

If you still hurry you might be able to purchase one from Best Buy or another local Computer store, if you already own a GoPro you should definitely pick up while you still can. I will upload some more mods as I do them, so far I plan on upgrading the GPS, HDMI cables, and adding some Moon gel.

You can use your cell phone to view the live video feed that is streamed from the 3DR back to you on the ground, but I decided to upgrade to a tablet instead. I decided I needed one with good battery life and it must have GPS in order for the “Smart Shots” to work. So I went with a Lenovo Tab from Amazon, it works really well and its much easier to plan out missions on. However there are many compatible tablets that can be used such as the ever popular iPad lineup

Time For some upgrades!

I decided to use my #Flashforge 3D Printer to print out some upgrade parts from Thingiverse. I went with a new Gimbal clips that prevents the GoPro from falling out of the Gimbal while your flying. The clip that comes installed from the factory requires that you remove the GoPro in order to remove your Micro Sd Card.

The picture shown on the bottom right shows a simple upgrade that can be 3D Printed if you know or have your own printer, it allows you access to your Micro Sd card without the need to remove your GoPro.

If your running the 3DR Solo with a Gimbal like I am you might also want to consider some leg extensions, that will help your GoPro & Gimbal clear the Grass or any obstacles low to the ground. They are easily installed, all you need to do is remove the old clips and snap these in their place!

The post Check Out My 3DR Solo Modifications! appeared first on Errin Lyons.

Hey folks! Today I am gonna talk to you about some of my Fidget Spinners! Until this year I had never heard about these so called “Hand Spinners” or “Fidget Spinners”. Well after printing out a few frames that I found online I decided that I would design my own frame and see if I could get good or better results. Two frame designs in I found the design that I would keep and called my own. I used my Flashforge Creator Pro 3D Printer to print out some frame prototypes so I could check if my measurements were correct.

Please Click Here to Place Your Order Today!

You can also Contact Us Here if you need help or have a Question.

I am now comparing the spin types and the speed of two bearings: the first bearing is by Spitfire and they work well, good spin times and fairly smooth. The second bearing is by Bones and they are also good bearings, they spin smooth and for just as long. The only difference I can distinguish is that the Bones Bearings spin a little quieter and smoother than the Spitfire Bearings.

The Spinners show below are printed with Hatchbox PLA and to be honest I feel that the PLA material is far superior than ABS when it comes to Fidget Spinners. I’ve printed Spinners using both ABS & PLA, and I prefer using PLA for the Spinners. I have had way less stress fractures that you commonly see with ABS, the PLA also has a great surface finish.  Most of the spinners I’ve made spin for at least 30 seconds and up to a 1 1/2 minutes!  A lot of people don’t care that it spins for more than 15-20 seconds, well I prefer long spin times, so these work out for me and most other people seem to like this design as well.

The post 3D Printed Fidget Spinners | San Antonio appeared first on Errin Lyons.